FUTURELECTRIC
Products
CompatibilityGuidesFAQDownloads
About usContact

Contents

  1. What this covers
  2. Available lengths
  3. What is in the box
  4. Technical data
  5. Compatible headlights
  6. Step by step
  7. Common mistakes
  8. Questions about the product

Guides

Connecting lights to Shimano STEPS – open ends and cable lengths

10 min read·30 Jul 2026·Shimano, Litemove, Lupine, Supernova1

How to connect a headlight with a CT1 / Higo Micro B compatible plug using our open-end headlight cable — compatible with Shimano or other motor systems; lengths 1300 / 1900 / 2300 mm, each available as single pack or workshop pack.

Contents

  1. What this covers
  2. Available lengths
  3. What is in the box
  4. Technical data
  5. Compatible headlights
  6. Step by step
  7. Common mistakes
  8. Questions about the product

What this covers

Our headlight cable connects an open cable end at the light port to a CT1B plug (HIGO Micro B Male compatible). It is intended for Shimano STEPS and other motor systems with an open end — without a proprietary system plug on the drive.

Headlight cable art. no. SHCT1Bc130bs – open end and CT1B

Looking for the right cable?

Browse all products or check drive-system compatibility.

All productsCompatibility
FUTURELECTRIC

Products

  • All products
  • Headlight cables
  • Motor cablesComing soon
  • Connectors & accessories

Support

  • Compatibility check
  • Guides
  • Assembly and safety instructions
  • Packaging
  • FAQ
  • Contact

Company

  • About us
  • Trademark notice
  • Imprint
  • Privacy

© 2026 futurelectric. All rights reserved.

E-Bike Front Light Cable

View product →

Art. no. SHCT1Bc130bs, EAN 4262582090015 – single pack, 1300 mm.

Art. no. SHCT1Bc130bs|EAN 4262582090015

Available lengths

Three lengths (each × 3.0 mm), each available as single pack or workshop pack. Measure the route from the light port to the headlight and choose the matching article number.

  • 1300 mm — available as single pack art. no. SHCT1Bc130bs (EAN 4262582090015) / as workshop pack art. no. SHCT1Bc130bw (EAN 4262582090114)
  • 1900 mm — available as single pack art. no. SHCT1Bc190bs (EAN 4262582090022) / as workshop pack art. no. SHCT1Bc190bw (EAN 4262582090138)
  • 2300 mm — available as single pack art. no. SHCT1Bc230bs (EAN 4262582090039) / as workshop pack art. no. SHCT1Bc230bw (EAN 4262582090145)

What is in the box

Two packaging options, same cable specification per length. Example 1300 mm: single pack includes 1× cable plus 1× futurelectric CT22 2-2 single-wire connector (0.4–0.7 mm). Workshop pack: 10× cables — without CT22. Same pattern for 1900 mm and 2300 mm. For open ends in the workshop, order connectors separately: art. no. CT22-BO100 (100× per box).

Single pack art. no. SHCT1Bc130bs

E-Bike Front Light Cable

View product →

Single pack · 1× cable + CT22

Art. no. SHCT1Bc130bs|EAN 4262582090015

Scope of delivery

  • 1×futurelectric Front Light Cable w. plug CT1 + open cable ends/ Shimano 1300 mm
  • 1×futurelectric CT22 2-2 single-wire connector with grease filling 0.4–0.7 mm
Workshop pack art. no. SHCT1Bc130bw

E-Bike Front Light Cable

View product →

Workshop pack · 10× cables

Art. no. SHCT1Bc130bw|EAN 4262582090114

Scope of delivery

  • 10×futurelectric Front Light Cable w. plug CT1 + open cable ends/ Shimano 1300 mm

Technical data

Product typeE-bike lighting cable
VersionConnection cable
Connection typeOpen cable end to CT1B plug (HIGO Micro B Male compatible)
Dimensions1300 × 3.0 mm
Insulation materialTPU
Contact materialCopper
Temperature range-25 °C – +80 °C
Cable cross-sectionAWG24
Protection ratingIPX6
Standards and complianceUL20549 | RoHS | REACH
Dielectric strengthAC250V
Max. plug current3A (CT1B)
TypeAccessory/passive component

Compatible headlights

Use this cable to connect headlights with a CT1 or Higo Micro B compatible plug — compatible with Litemove, Lupine (HIGO plug) and the Supernova Power-Connection-System.

Open cable end at the light port – close-up art. no. SHCT1Bc130bs

E-Bike Front Light Cable

View product →

Drive-side open end (connection for Shimano or other systems).

Art. no. SHCT1Bc130bs|EAN 4262582090015
CT1B side of the headlight cable – close-up

E-Bike Front Light Cable

View product →

Light-side CT1B plug.

Art. no. SHCT1Bc130bs|EAN 4262582090015

We verify connector compatibility ourselves (as of 2026-07-30). That means the mechanical and electrical plug interface — not further properties of the drive or the headlight. Before installation, check the requirements of the drive system and the lighting. If you are unsure, contact us or have the work done by a specialist workshop.

Step by step

  1. Power down the drive and lighting. Check Shimano STEPS and headlight manufacturer requirements.
  2. Connect the open cable end to the drive light port properly. The single pack includes CT22 0.4–0.7 mm. The workshop pack includes no CT22 — order connectors separately as 100-piece box art. no. CT22-BO100.
  3. Seat the CT1B plug on the headlight with a CT1 or Higo Micro B compatible interface.
  4. Route the cable without tension, kinks or abrasion. Length: 1300 / 1900 / 2300 mm by article.
  5. Check the function according to the instructions for the drive and the light. If you are unsure, contact us or have the installation done by a specialist workshop.
Cable routing on Shimano STEPS: open ends at the drive, CT1B at the handlebar

Routing from the open cable end at the drive to the headlight plug (CT1B).

Common mistakes

  • Wrong length: measure the route; 1300 / 1900 / 2300 mm are fixed sizes, not a recommendation for a particular frame type.
  • Headlight without a CT1 / Higo Micro B compatible plug: the CT1B light side will not match.
  • Mixing workshop and single-pack EANs: same tech per length, different quantity; CT22 only in the single pack — for the workshop order art. no. CT22-BO100 (100-piece box) separately.

Questions about the product?

CT

Author

Christian Treugut

Founder and Managing Director

Contact

More guides

All guides
  • Cable routing on the Bosch Smart System (BES3) to the CT1B plug at the handlebar

    9 min read·Bosch

    Retrofitting lights on Bosch Smart System – connection and matching cables

    How to connect a headlight with a CT1 / Higo Micro B compatible plug to the Bosch Smart System (BES3) from model year 2022 using our headlight cable – 1300 mm, available as single pack or workshop pack.

    Read guide
  • Cockpit schematic: headlight with CT1 connectors and cable from the system – illustration

    8 min read·Litemove

    Connecting headlights compatible with Litemove – CT1 and futurelectric cables

    Which of our cables match headlights with a CT1 plug — compatible with Litemove, by drive system and as a CT1 extension.

    Read guide
  • futurelectric single pack headlight cable – carton front (Shimano open example)

    6 min read

    Single or workshop pack? – Difference and scope of delivery

    Single pack: 1× cable for end customers, with CT22 when the cable has open ends. Workshop pack: always 10× cables of the same spec, without CT22 — connectors for open ends available separately as 100-piece box CT22-BO100.

    Read guide

Last reviewed·30 Jul 2026

Brands mentioned·Shimano, Litemove, Lupine, Supernova1

1All trademarks mentioned are the property of their respective owners. futurelectric is an independent manufacturer. Third-party brand names are used solely to describe product compatibility and do not imply approval or testing by the respective manufacturer. Full trademark notice