Guides
Connecting and retrofitting e-bike lights with futurelectric cables — by drive, headlight, length and purchase path.
Drive
Light
9 min readBosch
Retrofitting lights on Bosch Smart System – connection and matching cables
How to connect a headlight with a CT1 / Higo Micro B compatible plug to the Bosch Smart System (BES3) from model year 2022 using our headlight cable – 1300 mm, available as single pack or workshop pack.
Read guide
8 min readLitemove
Connecting headlights compatible with Litemove – CT1 and futurelectric cables
Which of our cables match headlights compatible with Litemove with a CT1 plug — by drive system and as a CT1 extension.
Read guide
6 min read
Single or workshop pack? – Difference and scope of delivery
Single pack: 1× cable for end customers, with CT22 when the cable has open ends. Workshop pack: always 10× cables of the same spec, without CT22 — connectors for open ends available separately as 100-piece box CT22-BO100.
Read guide
10 min readShimano
Connecting lights to Shimano STEPS – open ends and cable lengths
How to connect a headlight with a CT1 / Higo Micro B compatible plug using our open-end headlight cable — compatible with Shimano or other motor systems; lengths 1300 / 1900 / 2300 mm, each available as single pack or workshop pack.
Read guide
7 min readLitemove
Extending e-bike light cables – CT1 extension and Y cable
Extension via CAc30 (CT1A→CT1B, 300 mm) or YCc50 (open, 500 mm) — without inventing custom lengths.
Read guide7 min readLupine
Connecting headlights compatible with Lupine – HIGO plug and CT1B
Connect headlights compatible with Lupine with a HIGO plug via our CT1B plug (HIGO Micro B Male compatible) to the system-side cables.
Read guide
8 min readYamaha
Retrofitting lights on Yamaha PW-X3 / PW Series S2 – system plug to CT1B
How to connect a headlight with a CT1 / Higo Micro B compatible plug to Yamaha PW-X3 / PW Series S2 using our headlight cable – 1300 mm, available as single pack or workshop pack.
Read guide
8 min readShimano
Choosing the right cable length – Shimano 1300 / 1900 / 2300 mm and other sizes
Catalogue lengths: Shimano open-end cables in 1300, 1900 and 2300 mm plus further sizes for Bosch, Yamaha, Avinox and Universal. Choose by measuring the routing path.
Read guide7 min readSupernova
Connecting headlights compatible with Supernova – Power-Connection-System
Our CT1B cables and the CT1 extension are compatible with the Supernova Power-Connection-System via the CT1B plug (HIGO Micro B Male compatible).
Read guide
11 min readAvinox
Retrofitting lights on Avinox – HG01 / Micro M and variants
Three variants compatible with Avinox M1 & M2: Micro M (Higo Z405MM) to CT1B (400 mm) or to open ends (300 mm), plus a Y light cable with two open ends — each available as single pack or workshop pack.
Read guide
7 min readShimano
Joining open light cables with moisture resistance – CT22 single-wire connector
CT22 2-2 pole with grease filling for wires 0.4–0.7 mm (AWG 21–26); dimensions 23 × 4 × 8 mm; moisture-resistant and self-sealing — not waterproof; no ingress-protection rating stated.
Read guide9 min readLitemove
Universal light extensions and connectors – CT1A/CT1B and open ends
300 mm CT1A→CT1B extension and 500 mm open→open Y extension incl. CT22 — each as single or workshop pack (10×) — plus CT22 single-wire connectors CT22-BO100 (100×) — without a proprietary system plug.
Read guide
10 min readBosch
Retrofitting lights in the specialist workshop – workflow and workshop packs
Practical guide for workshops: identify the system, pick the matching EAN, use workshop packs (10×), documentation and liability notes.
Read guide6 min read
Light does not work after retrofit – checklist without speculation
Systematic checklist: plug side, length/variant, CT22 range, pack contents — check steps only, no invented fault diagnoses.
Read guide