FUTURELECTRIC
Products
CompatibilityGuidesFAQDownloads
About usContact

Contents

  1. What this covers
  2. What is in the box
  3. Technical data
  4. Compatible headlights
  5. Step by step
  6. Common mistakes
  7. Questions about the product

Guides

Retrofitting lights on Yamaha PW-X3 / PW Series S2 – system plug to CT1B

8 min read·30 Jul 2026·Yamaha, Litemove, Lupine, Supernova1

How to connect a headlight with a CT1 / Higo Micro B compatible plug to Yamaha PW-X3 / PW Series S2 using our headlight cable – 1300 mm, available as single pack or workshop pack.

Contents

  1. What this covers
  2. What is in the box
  3. Technical data
  4. Compatible headlights
  5. Step by step
  6. Common mistakes
  7. Questions about the product

What this covers

Our headlight cable connects the system plug on Yamaha PW-X3 / PW Series S2 to a CT1B plug (HIGO Micro B Male compatible). Dimensions per data sheet: 1300 × 3.0 mm.

E-Bike Front Light Cable

Looking for the right cable?

Browse all products or check drive-system compatibility.

All productsCompatibility
FUTURELECTRIC

Products

  • All products
  • Headlight cables
  • Motor cablesComing soon
  • Connectors & accessories

Support

  • Compatibility check
  • Guides
  • Assembly instructions
  • FAQ
  • Contact

Company

  • About us
  • Trademark notice
  • Imprint
  • Privacy

© 2026 futurelectric. All rights reserved.

E-Bike Front Light Cable

View product →

Art. no. YX2YCT1Bc130bs, EAN 4262582090046 – single pack.

Art. no. YX2YCT1Bc130bs|EAN 4262582090046

What is in the box

Two packaging options, same cable specification (1300 × 3.0 mm, system plug and CT1B). This cable has no open ends and includes no CT22 — cable only:

E-Bike Front Light Cable

E-Bike Front Light Cable

View product →

Single pack · 1× cable

Art. no. YX2YCT1Bc130bs|EAN 4262582090046

Scope of delivery

  • 1×futurelectric Front Light Cable w. plug CT1 + Yamaha PW-X3 / PW Series S2 1300 mm
E-Bike Front Light Cable

E-Bike Front Light Cable

View product →

Workshop pack · 10× cables

Art. no. YX2YCT1Bc130bw|EAN 4262582090152

Scope of delivery

  • 10×futurelectric Front Light Cable w. plug CT1 + Yamaha PW-X3 / PW Series S2 1300 mm

Technical data

Product typeE-bike lighting cable
VersionConnection cable
Connection typeYamaha PW-X3 / PW Series S2 plug to CT1B plug (HIGO Micro B Male compatible)
Dimensions1300 × 3.0 mm
Insulation materialTPU
Contact materialCopper
Temperature range-25 °C – +80 °C
Cable cross-sectionAWG24
Protection ratingIPX6
CertificationsUL20549 | RoHS | REACH
Dielectric strengthAC250V
Max. plug current3A (CT1B)

Compatible headlights

This cable is for retrofitting lighting compatible with Litemove and brands with a Higo Micro B compatible plug. Suitable for: Litemove with CT1, Lupine with HIGO plug, Supernova Power-Connection-System.

E-Bike Front Light Cable

E-Bike Front Light Cable

View product →

Drive-side system plug

Art. no. YX2YCT1Bc130bs|EAN 4262582090046
E-Bike Front Light Cable

E-Bike Front Light Cable

View product →

Light-side CT1B plug

Art. no. YX2YCT1Bc130bs|EAN 4262582090046

We verify connector compatibility ourselves (as of 2026-07-30). The statement describes the mechanical and electrical plug interface. It is not a warranty of further properties. Before installation, check the technical requirements of the drive system and the lighting. If unsure: use a specialist workshop.

Step by step

  1. Power down the drive and lighting. Check Yamaha PW-X3 / PW Series S2 and headlight requirements.
  2. Connect the system plug to the Yamaha system light port. Plug designation per data sheet: drive-side system plug, compatible with Yamaha PW-X3 / PW Series S2 – CT1 plug 1300 mm.
  3. Seat the CT1B plug on the headlight with a CT1 or Higo Micro B compatible interface.
  4. Route the cable without tension, kinks or abrasion. Length: 1300 mm.
  5. Function-test per drive and light instructions. Consult a workshop if unsure.
Cable routing on Yamaha PW-X3 / PW Series S2 to the CT1B plug at the handlebarCable routing on Yamaha PW-X3 / PW Series S2 to the CT1B plug at the handlebar

Routing from the system plug (Yamaha PW-X3 / PW Series S2) to the headlight plug (CT1B).

Common mistakes

  • Wrong motor system: this cable applies to Yamaha PW-X3 / PW Series S2. Do not infer other Yamaha variants from this article.
  • Headlight without a CT1 / Higo Micro B compatible plug: the CT1B light side will not match.
  • Mixing workshop and single-pack EANs: same tech, different quantity and packaging.

Questions about the product?

CT

Author

Christian Treugut

Founder and Managing Director

Contact

More guides

All guides

  • 9 min read·Bosch

    Retrofitting lights on Bosch Smart System – connection and matching cables

    How to connect a headlight with a CT1 / Higo Micro B compatible plug to the Bosch Smart System (BES3) from model year 2022 using our headlight cable – 1300 mm, available as single pack or workshop pack.

    Read guide

  • 8 min read·Litemove

    Connecting headlights compatible with Litemove – CT1 and futurelectric cables

    Which of our cables match headlights compatible with Litemove with a CT1 plug — by drive system and as a CT1 extension.

    Read guide

  • 6 min read

    Single or workshop pack? – Difference and scope of delivery

    Single pack: 1× cable for end customers, with CT22 when the cable has open ends. Workshop pack: always 10× cables of the same spec, without CT22 — connectors for open ends available separately as 100-piece box CT22-BO100.

    Read guide

Last reviewed·30 Jul 2026

Brands mentioned·Yamaha, Litemove, Lupine, Supernova1

1All trademarks mentioned are the property of their respective owners. futurelectric is an independent manufacturer. Third-party brand names are used solely to describe product compatibility and do not imply approval or testing by the respective manufacturer. Full trademark notice